TH400 Vacuum Modulator
I recently swapped a trans and case from a 78 Wagoneer to a 79 Cherokee. My problem is shifting, not real sure if it is a smoked trans, or the vacuum modulator is out of adjustment. Does anybody know if there is a common setting for the adjustment, or turning the screw in increases, or decreases shift points? The reason for the swap, the wagoneer had front lock-out hubs with 3.54 gears and a mile marker part-time kit in the case
Dreaming about always turning left.
Reality.....Wheelin my 79 Cherokee.
Re: TH400 Vacuum Modulator
I Figured out the problem! I took the old vacuum Modulator off the old trans, and figured out that I had screwed up installing the new one. Much better now!
|All times are GMT -5. The time now is 06:38 PM.|
Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright ©1994-2009, VerticalScope Inc. // Off Road forums & discussion groups sitemap
side by side | atv | dirtbike | snowmobile | sandsport | competition | land use | Jeep | Toyota | Ford | GM