![]() |
Off-Road Forums & Discussion Groups
(https://forums.off-road.com/forum.php)
- GM Standard IFS Trucks & SUV's
(https://forums.off-road.com/gm-standard-ifs-trucks-suvs/)
- - Deisel
(https://forums.off-road.com/gm-standard-ifs-trucks-suvs/32912-deisel.html)
Deisel
I know a guy who's selling an 80's model 4wd Suburban. I haven't had a chance to find out specifics as I just noticed it while I was on the go. I do know that it's got 8 lug wheels, it's a deisel and the body appears to be somewhere around 85-87. What type of hardware would you expect to find on one of these as far as axles, t-case, transmission. I'm pretty sure it's an automatic. I know this is a little vague[img]/wwwthreads_images/icons/blush.gif[/img] but I'm just trying to get an idea cause I'm real interested in it and I can't find anything out until later tonight so I'm jonesing for some info.[img]/wwwthreads_images/icons/cool.gif[/img]
|
Re: Deisel
How about 10 bolt front, 14 bolt rear, np208 and th700 ?
Andreas If a Blazer runs smooth, it isnīt really a Blazer[img]/wwwthreads_images/icons/crazy.gif[/img] |
Re: Deisel
I had a 1982 Blazer 4x4 with a 6.2 Diesel at one point in time. It had a 700R4 tranny and NP208 transfer case (don't know if it was original equipment, though). The axles were standard 1/2 ton axles, with a 12 bolt rear and 10 bolt front. Axle ratios were 3.08 and fuel milage was somewhere around 22+ MPG. The rear axle was actually a corporate posi - the only 3.08 posi I have ever seen in a truck. The rig had over 240,000 miles on it when I parted it out. The whole body was literally falling apart. I'd still be driving the truck today if the body would have held out a little longer. Just a side note - I think a 6.2 Diesel is heavier than a 454 even though it's only got 378 cubes, so check the front suspension...
|
Re: Deisel
In 1980 every fullsize 4x4 GM truck had an NP205 transfer case. Very nice, especially with an Auto, since it's rare. Tranny is probably a TH400. I'm not sure what GVWR the Diesels were available with, but in general a 1/2 ton will have a pair of 10 bolts, the 3/4 ton should have a 14 bolt rear (could be either SF or FF), and a 10 bolt front.
<font color=green>Evan</font color=green>[img]/wwwthreads_images/icons/crazy.gif[/img] <font color=red>- Contagious Off-Road -</font color=red> http://www.rps.net/PICS/stuff/biohazard.gif |
All times are GMT -5. The time now is 03:43 PM. |
Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
User Alert System provided by
Advanced User Tagging (Pro) -
vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
vBulletin Security provided by
vBSecurity v2.2.2 (Pro) -
vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Copyright Đ1994-2009, VerticalScope Inc. // Off Road forums & discussion groups sitemap
side by side | atv | dirtbike | snowmobile | sandsport | competition | land use | Jeep | Toyota | Ford | GM