Join Date: May 2000
Location: Murray, KY
Thanked 0 Times in 0 Posts
2001 ZR2 Pickup with 10\" Centerlines and 33x14.50
I'm posting these for a guy that sent me a happy e-mail for me helping me get his truck set up right. With all the measurements and where to buy and what to run, he did it when the truck had 500 miles on it with the info I sent him. Now it has about 3000 miles on it. I have more info on this setup and am going to a NUKE plant next week for a month to work and am going to visit this guy that lives in NY and get better photos while I'm there. He said like I told him that 33x12.50's would have been under but, these tires don't rub at all anywhere and he likes the fatty's he's running. Said it had a good ride to it, not too stiff and drives like stock. This truck like I said is brand new and I have said that I know my stuff and this is proof. I will be doing a complete write up on this truck and posting good pics for him here, on S-10 4x4, and some ZR2 sites I belong too. He's not good a photos or Computers but this truck HAS to be posted. Let me know if you what all the info on this setup by e-mail. It was $1000 for the BDS 5" lift, $250 or so for the TMaster shocks, and around $2000 for the wheels and tires or about $3250 total. He is talking to me about Supercharging it and getting a programmer right now to get it all right. He said by going with the Lightweight rims instead of Heavy Cast wheel, the truck has as much pull as it did and can't tell any difference in power or mileage by doing it the way I would. You have to help out these motors by doing it right the 1st time.
Tom "Deep Sea Diver" Brantley