Why not just pull yours down, take the headliner itself off of the little backing board thingee, and glue it back on? Might save some $$ and the material would be a closer match to the current color of the inside of your truck (assuming it's like every other vehicle and faded at least a little bit)... Just a thought to help save some $$$ possibly... [img]/wwwthreads_images/icons/cool.gif[/img]
I went to the fabric store and got me some new fabric with the foam backing. They had the spray glue for it. All you have to do is pull the board down and lay it out. Take a scrub brush of some kind and brush off all the old foam. Then lay the new fabric as you spray the glue. Mine turned out great.
Anyone have any ideas where to get a "complete" headliner with board and all for an 89 4x4 ext cab S-Truck? My board was cracked and the headliner in bad shape a couple years ago so I tossed it all. My board was made out of styrofoam and cracked. Where can I get the whole thing at? I can find cover kits like at JC Whitney for $50 but need the board to put it on. Where can I get it from scratch though?
You could go to the lumber yard and get yourself some of that thin wooden panelling, then make a template using some form of cardboard, or maybe the paper you use for taping a vehicle off to paint it. Then you could just transfer the pattern onto that wood and cut with a jigsaw. Or perhaps you could use some kind of plastic sheet if you can find some. Just some thoughts. You might try a scrap yard for the headliner just for the board itself.