Can't Get Enough
Join Date: Dec 2002
Thanked 2 Times in 2 Posts
Re: 95 S-10 from 2 - 4 wd conversion
If you were to do it, you'd probably want a solid front axle.
So you would need a transfer case, front axle, front springs, driveshaft, etc... You'd probably have to get a different tranny, or at least change the tailshaft so it mates up to a transfer case.
I think there's a company that makes S10 IFS to SFA kits, that may be helpful. Post over on the Small GM truck board, they can probably help more.