Join Date: May 2003
Thanked 0 Times in 0 Posts
Re: 1993 S10 Blazer remote entry programming
Well there was no answer from anyone here on this board so I went to another and got my answer. The connections are the A and G, black with white striped wire and a purple wire. They are to top right and bottom left on my S10. With the key on, insert the paper clip to connect the two terminals and the doors should lock then unlock. Press a button on a remote and the doors should cycle again. The remote is programmed. Repeat for each remote. Once done, remove the paper clip and shut off the key.