Re: Cranking the stock Torsion Bars?
i got an 1" i shulda gone more.. I can.. But i think i got 3 1/2 turns to achieve one inch.. make sure you spray them with panther piss (PB blaster) 2 days ahead of time.. and it took 15 mins..do it in a flat surface.. like in a shop.. do both sides at the same time.. and lift the truck up off the ground so u wont ring off the bolts.. Measure a point from the frame down.. and make marks so u measure the same each time.
Get 2 people.. one turning one bolt the other turning the other.. try to turn them the same.. then let the truck down.. bounce it, make sure it settles, then measure it make sure there even.. then get an alignment right after.