I am thinking about parting out my truck and am just seeing if anone needs anything. Its an 82 f-150 4x4 I mite just try to sell it but wanted to see if anyone could use some parts. If I do part it out I already have the rear end sold but nothing else. Most of the truck is in good shape but the body is shot. Lots of new parts. or if someone wants to buy the hole truck you can look at it here. I can't get it to go right to the picture but click on image gallery and then on the first album.
The motor is a 5.0 HO out of an 89 mustang and has 200,000 miles but runs great very well taken care of C-6 trans don't know what t case it has but nothing wrong with it the trans was rebuilt before I bought it at about 140,000 and I was told it has a shift kit. The rear end has a 2 year old detriot true track diff 3.55 auburn gears all new berings and seals one new drive shaft. in the last 6 months I put in new ball joint's new u joint's on the drive shafts and the front axle shafts new manual locking hubs (warn) I also bought new coil springs for the front but have not installed them yet I have installed new gas tanks and conected them with air craft hose and fittings so you can fill both tanks at once. The tires are in very good condition kelly SUV's 31x10.50x15 new brakes within 6 mothes (front) and rear brakes within 1 year all ruber lines have been replaced a year ago. New gear box and tie rod ends within 2 years. I don't know what the front diff is but all four tires spin in four wheel very good traction. has trailer hitch and trailer brake hook-up. The front seats are capten chairs. What it needs is radius arm bushings maybe the brakets new shocks rear leaf spring and to install the front springs front winshield and a new body. Rear leaf springs I can get from www.acmetruckparts.com for $200 I priced out the body parts that it needs and I can get them through my work for $900 we get like 45% discount parts that I priced out were
2 bed sides
2 rear cab repair panels
I have the front bumper the picture is about a year old and now it has a red hood and door but not in good condition Most of the fenders are surface rust not though but surface rust. I also have a 351 cleavland 4 bolt main complete motor that needs to be rebuilt that I mite sell with 2 sets of heads.