Re: 32x11.5\'s on a stock 84 Bronco
I ran 32"x11.50" tires on an 8" wheel with factory back spacing and had no problems with rubbing on the fenders, but I did have to adjust the turn stops so they wouldn't rub on the radius arms. I recently went to a 10" wheel with the same back spacing. I have not been wheeling with the new wheels yet, but they will rub and probably tear up the fender. With the 8" wheels the tires could and would go into the wheel well, but with 10" wheels, the tires stick out too far and will hit the top of the fender. If you brought the body off the chassis about an inch or two, you won't ahve a problem with 10" wheels. This is what I am experiencing now anyway.
Eric R. Tachell