front axle seal...73 dodge
anyone know anything about changing the front axle seal on a 73 dodge 3/4 ton? its a dana 44 in front, and im told that the seal has to go in through the pumpkin on the diff, which involves pulling out all the gears and disassembling the whole thing, so if anyone knows the validity of this, or an easier way to do it, please post....
Replacing Oil seals in a 44
Sorry to inform you that the only way to replace the seals is to pull the carrier. The good news is that 44s are shimmed inside of the bearings so all you have to do is mark the caps for the carrier so you put them back on the same way they came off. It's really not that hard to do. The hardest part is pulling your axles, but it's about a 4 hour job.Good luck.
|All times are GMT -5. The time now is 05:20 AM.|
Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1994-2009, VerticalScope Inc. // Off Road forums & discussion groups sitemap
side by side | atv | dirtbike | snowmobile | sandsport | competition | land use | Jeep | Toyota | Ford | GM