Need some stock Dodge Lower Control arms - Off-Road Forums & Discussion Groups
Dodge 4x4 vehicles All discussion of Dodge trucks, Ramchargers, Plymouth and SUV's...

Reply
 
LinkBack Thread Tools Display Modes
post #1 of (permalink) Old 12-10-2002, 10:42 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Need some stock Dodge Lower Control arms

I know there has to be some out there. Anybody?

Marcus

[email protected]
Sponsored Links
Advertisement
 
post #2 of (permalink) Old 12-11-2002, 12:32 AM
Mud in my Veins
 
AJMBLAZER's Avatar
 
Join Date: Mar 2000
Location: Paducah, KY
Posts: 6,656
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Need some stock Dodge Lower Control arms

What year and model of truck, 2wd or 4x4, half-, 3/4- or 1-ton?

jflongo here on this forum just put a 5" Skyjacker on his 94+ 1500 4x4, so he might still have a set laying around. Just a thought.
AJMBLAZER is offline  
post #3 of (permalink) Old 12-11-2002, 02:43 AM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

Thanks for the reply. I need some from a 4x4. I was under the impression that they were all the same (well from 94 up when Dodge started using the coil front end on 4x4's). Basically, I need a standard Lower Control Arm that measures about 20 inches eye-eye. Please excuse my ignorance.

Thanks again,
marcus
Sponsored Links
Advertisement
 
post #4 of (permalink) Old 12-11-2002, 11:24 PM
Mud in my Veins
 
AJMBLAZER's Avatar
 
Join Date: Mar 2000
Location: Paducah, KY
Posts: 6,656
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Need some stock Dodge Lower Control arms

I can't confirm or deny the control arms being the same theory, but I'd say call your local Chrysler Parts Department to find out.

What is your truck, half ton, 3/4 ton, 1 ton?
AJMBLAZER is offline  
post #5 of (permalink) Old 12-12-2002, 04:07 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

I tried to search for the name you gave me, thanks again by the way, and I couldn't find it.

Here's the thing: I don't have a dodge. I have a jeep, a Cherokee, which I'm sure you know uses the same type of front suspension, just smaller. I got the front part of the Skyjacker Rock Ready kit, which uses longer front arms. It turns out that the lower arms are just dodge arms. My lower arms are basically the dodge double flex arms with heims on each end of the arm. I don't want these arms and am building my own. So I am getting rid of the SJ arms and need some temporary arms while I build my own. That's the deal.

Thanks again for your help.

Marcus
post #6 of (permalink) Old 12-12-2002, 09:29 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

I will have to double check. I may have my Control Arms laying around. They are from a 1995 Dodge Ram 1500 4x4. I'll try and a take a picture of them, and see if they will work for you. I'll try and post them soon.
post #7 of (permalink) Old 12-12-2002, 09:45 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

Ok found them, here are pictures...of all 4...

[image]http://photos.yahoo.com/bc/longoja/vwp?.dir=/My+Truck&.src=ph&.dnm=oldControlArms+001.j pg[/image]
Attached Images
File Type: jpg 969743-oldControlArms 001small.jpg (92.7 KB, 6 views)
post #8 of (permalink) Old 12-12-2002, 11:56 PM
Mud in my Veins
 
AJMBLAZER's Avatar
 
Join Date: Mar 2000
Location: Paducah, KY
Posts: 6,656
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Need some stock Dodge Lower Control arms



Now made clickable![img]images/graemlins/grin.gif[/img]
AJMBLAZER is offline  
post #9 of (permalink) Old 12-16-2002, 05:44 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

Sorry for the delay, went out of town for a few days. Thanks again for all the help guys. Any possibility you could tell me the eye to eye measurements of each (lower and upper, just to double check I can use them)? If they are long enough, would you be willing to part with them? Thanks a ton.

Marcus
post #10 of (permalink) Old 12-17-2002, 09:15 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: Need some stock Dodge Lower Control arms

I'll try and measure them tomorrow [img]images/graemlins/smile.gif[/img]
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Off-Road Forums & Discussion Groups forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in










Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome