raptor fuel system installed on 02 cummins with in tank pump.
The in tank was a manufacture retrofit on these trucks
Kit comes with pump, lines, frame mounting bracket and sending unit kit to install new suction line.
Modding the sending unit took me longer then installing the rest of the kit.
New suction kinda cool machined part
Stock pump gutted from the unit and new suction installed. ready to go back in the tank.
Decided to pull the bed.
Bracket installs easy. But I don't like that it hangs down
Pump is adjustable for pressure and is running in the 17-19 range as advertised. The stock pump was 4psi at idle. This pump upgrade is an attempt to save the VP 44 injection pump
In this photo my daughters holding the rrrrs at 2k
Truck has deeper tone now
Very cool set up. Looking at doing a similar set up on my 88 F350 cummins swap.
|All times are GMT -5. The time now is 09:33 AM.|
Powered by vBulletin® Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
User Alert System provided by Advanced User Tagging (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
Copyright ©1994-2009, VerticalScope Inc. // Off Road forums & discussion groups sitemap
side by side | atv | dirtbike | snowmobile | sandsport | competition | land use | Jeep | Toyota | Ford | GM