Off-Road Forums & Discussion Groups - View Single Post - Going Howell TBI, but the '82 needs a bung-where?
View Single Post
post #3 of (permalink) Old 11-14-2002, 08:44 PM
TOM85CJ7
Keyboard Implanted
 
TOM85CJ7's Avatar
 
Join Date: Sep 1999
Location: Austin, Texas
Posts: 2,072
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Going Howell TBI, but the \'82 needs a bung-where?

My '82 had a threaded hole in the manifold. It is just above the flange for the front exhaust pipe section. There was a large cap rusted in there. It came out with some PB blaster and a large breaker bar. The threads were the same as the Howell O2 sensor. If necessary, I think you can actually weld the bung into the top section of exhaust tubing just before the manifold. That way you aren't drilling/welding cast iron.

Later,
Tom
TOM85CJ7 is offline  
 
 
For the best viewing experience please update your browser to Google Chrome