Off-Road Forums & Discussion Groups - View Single Post - Painless Wiring...
View Single Post
post #3 of (permalink) Old 02-27-2002, 10:01 AM
Swede
Enthusiast
 
Join Date: Sep 1999
Location: Dayton Ohio
Posts: 238
Thanks: 0
Thanked 0 Times in 0 Posts
 
Re: Painless Wiring...

I just put in a Centech kit from 4WD into my 80 CJ-7 because I had lost my tail lights, turn signals, back up lights, and my fan due to bad insulation. I got the kit that was preterminated except for the tail lights which you had to install a YJ style plug to the lights pig tail and a couple of other splices. The kit was easy to install but it did take me 15 hours to get it all up and working.

My kit has a open in the guage cluster curcuit which according to Centech is a pin not seated in a connector which I haven't located yet so I used a spare connection on the fuse board to run a jumper which has the guages working. I'll check the connector when it gets a little warmer around here. There are several spare fuse connectors to add additional curcuits for what ever you care to run.

Karl
80 CJ/YJ-7 FrankenJeep
89 YJ
94 Grand Cherokee
Swede is offline  
 
 
For the best viewing experience please update your browser to Google Chrome