Join Date: Oct 2000
Thanked 0 Times in 0 Posts
Re: Newbie Question
I made quite a few post on this subject a while ago.
I found out the best methods are chemical stripper(get the mean stuff or/propane torch..This works awesome! or a good wire wheel.
A air powered sander is nice too, as you don't have to put much "work" into it.
A razor scraper with the first too is needed.
My favorite were the stripper and the torch.
They were very fast.
If you do use the stripper, make SURE you clean the surface very well after you use it.
Spring over 33's
4.3L V6, TH350