Off-Road Forums & Discussion Groups - View Single Post - Input
Thread: Input
View Single Post
post #5 of (permalink) Old 03-06-2000, 04:48 PM
Posts: n/a
Re: Input

All 60deg V6's(2.8/3.1/3.4)w/cast iron heads use flat top pistons. The toasted bearing was probably
due to poor oiling. Don't know what year block you have(early/late) but there were design changes
(see my other posts) to improve oiling on the lower end of late models. Crane and Wolverine
(owned by crane) make cams for this family of engines all GEN1 cams are the same, the GEN2
(alum)heads are diffrent.

<font color=red> ALL THOSE WHO WANDER ARE NOT NECESSARLY LOST </font color=red> [img]/wwwthreads_images/icons/cool.gif[/img]
For the best viewing experience please update your browser to Google Chrome