Mud in my Veins
Join Date: Apr 2000
Location: Winston-Salem, NC
Thanked 0 Times in 0 Posts
Re: Automatic to manual question
What tranny was it mated to? My 304 was mated to a T15 3spd. and was changed to a TH400. The TH400 used a 3/4" adapter between the crank & flexplate, but I think the TFseries bolted direct to the crank. The flywheel that was bolted to mine was direct to the crank.
The only tip I have is To watch your bolt length and don't let them get into the block. They tend to ring off, trash the seal, or cause knocks hitting the webs on the bottom of the block.
'72 Commando "Project Mossy"