Join Date: Apr 2001
Thanked 0 Times in 0 Posts
Re: bumpers are installed
Right now the Samurai is still at stock height with the stock 205/70's. The only modifications that had to be done to get it on there was to cut the bumper tubes. Then slip the supplied pipe into the tube to strengthen it up. I did have to "adjust" the front frame ends a little bit with a hammer to get the bumper between the frame rails.
It only took about 30 minutes total to take the old one off, cut the tubes, hang the new bumper and remount the turn signals.
I will have to modify my CSC kit slightly for the bumper once I get it (I've been waiting for almost 9 weeks).
1986 Suzuki Samurai soft-top
1999 Toyota Tacoma