Off-Road Forums & Discussion Groups - View Single Post - a couple of questions from a newbie
View Single Post
post #2 of (permalink) Old 03-19-2001, 03:25 PM
**DONOTDELETE**
Guest
 
Posts: n/a
Re: a couple of questions from a newbie

i was able to do with a 3inch body and some fender trimming. The trimming was only in the front right at the bottom near the door. I did the 2 inch torsion and shackle and it did not rub at all. I run 32x10.5 on stock rims. Anything with more offset will cause it to rub in a lot of places. How ever i do not think that the body lift is the way to go. after having it installed for about a year i have noticed that some of the mounts are starting to sag down and push through the mounts. I also wheel hard...okay very hard, that could be the reason. If i had to do it again i would have gone with the 5 inch trailmaster lift or a SFA. But thats just me you can do what you want.Just remember to have fun.

MudderS10s
91 S-10 4.3L, 5 speed, 3 inch bodylift, 32" super swapper TSLs, 2 inch rear shackle lift
73 CJ-5 mods- way too many to list
 
 
 
For the best viewing experience please update your browser to Google Chrome