Off-Road Forums & Discussion Groups - View Single Post - Locking Hubs - I thought this was a no brainer
View Single Post
post #1 of (permalink) Old 06-15-2007, 03:58 AM Thread Starter
DuaneD
Enthusiast
 
DuaneD's Avatar
 
Join Date: Sep 1999
Location: Boilermaker Country USA
Posts: 295
Thanks: 0
Thanked 0 Times in 0 Posts
 
Locking Hubs - I thought this was a no brainer

Tonight I pulled the drivers side front locking hub off my stock Dana 30 axle. I removed the five bolts, pull the outer hub off the axle and then removed the retainer ring. Review and lightly pack with grease and slide the whole clutch pack back up on the axle no problem. Now I can't see the groove on the end of the axle to put the retainer ring back on. I need about a 1/16 of an inch and I can't move the clutch back back any more. Help! What have I not done? This was too easy, NOT. I can't believe this. What do I need to do guys?

1985 CJ with a transplanted 94YJ 4.0L motor, T176 tranny, mainly stock otherwise. ><>
DuaneD is offline  
 
 
For the best viewing experience please update your browser to Google Chrome