Re: tranny length question
Cooool. In that case, the whole thing becomes a real guessing game, because the 350 may not sit in the same place (and is a different length) than what you have now. I know of at least 2 v8 conversions that used 5.0 ford engines that were able to locate the engine 2 - 4 inches forward of where the I6 was before. Don't know of where exactly a 350 goes, but do know that it is not as short as the ford. I suspect that you will end up with the bellhousing in more or less the same place as an I6. I think you're going to have to talk to AA more to figure it out.