Join Date: Nov 2000
Location: newly relocated to Huntsville, AL
Thanked 0 Times in 0 Posts
Re: harmonic balancer on transfer case....
the balancer was stock and i removed it when i put the kit on. it was THE major pain of the conversion b/c like i said i needed metric 6x1.0 bolts that were 7 inches long to clear the stock output shaft. (trip to hardware store to buy metric bolts then welding them to the end of 5 inch long 1/4 bolts since they didn't sell any metric longer than about 2 inches) i don't have any pics of the balancer before i pulled it though.
and yes it in on my 00 TJ.