Off-Road Forums & Discussion Groups - View Single Post - distributer vaccuum advance question
View Single Post
post #1 of (permalink) Old 03-03-2004, 07:16 PM Thread Starter
USMCYJ
Journeyman
 
Join Date: Feb 2004
Location: Arizona
Posts: 155
Thanks: 0
Thanked 1 Time in 1 Post
 
distributer vaccuum advance question

I have my distributor advance line hooked up to the top port on my weber carb. I don't feel any suction when I cover that port with my finger but with a vaccuum gauge it tells me it pulls in some air. I can't remember the reading on the gauge. When it's hooked up to that port, the advance on the distributor moves. Should it do this or am I hooked up to the wrong port or what? I'm not too familiar with how the advance works so any and everything would help my limited knowledge on this. Also, when I take off the vaccuum line and plug it (and the port to the carb) it runs rough. I read a post on this and they said that it shouldn't move at idle. Correct? Incorrect? I don't know...
Tim
USMCYJ is offline  
 
 
For the best viewing experience please update your browser to Google Chrome