 77 KL250 ignition spark?
Hey guys,
I just bought a stripped kawasaki kl250a that im planning to rebuild. Engine has good compression and gearbox is in good nick. Its only kick start not electric. My problem is that i dont know how to wire the ignition system. I tested the ignition coil on another bike of mine and worked fine. There are three wires that come out of the engine (pretty sure its from the magneto), 2 yellow wires and a black. there is one black wire that comes out of the engine head, a black/yellow wire out of the ignition coil and a black/white wire that comes out of the kill switch. If anyone knows which wires go where or a diagram so i can get it to spark it would be greatly appreciated.
Thanks in advance,
Dom | 
Linear Mode
