Serious dune Banshee

96warrior · #91 07-10-2003, 06:50 AM

I have it all put back together, the new reeds are alot stronger then the old ones. It runs good up to 3/4 throttle now. I'm waiting for 230 and 220 mains right now, there on order. I have 240 mains, and with this warm weather it is dead rich wide open throttle. The directions on the reed instalation instructions said this also. I slid the clip all the way back up to the top, but it's still to rich, now I can only wait for the mains, it runs like a champ everywhere else though. I called my local mechanic and parts guy, he's trying to find a vendor that has tr6 pipes that aren't on backorder. I want something that makes a bit more peak power then my dg's, and obviously something that works better. The cpi's would be the pipes to get If I strictly duned it. But I need something like what I have now, with more top, and I HAVE to have spark arrestors. They are really picky about that here in mich. So it's either tr6 or fatties. I figured with the tr6's I'd get what I pay for?

Not sure if they work well with ported motors, they should I'd think. I need to get someone from toomey on the phone or e'mail them. Price really isn't an issue, but I'm not gonna go way overboard either yet.

(edit) [img]images/graemlins/confused.gif[/img] are you ticked off at me?

It should be all good to go now, after I get the mains. There mikuni tm flat slides. Running 2 galons of 110 octane sonoco, mixed with 3 gallons of 92 octane pump gas, mixed with golded spectro 50-1. According to the plugg check, and wot symptoms it's just rich jetting. I checked everything else out, and it's good to go.

Any other insight, the honda boys over there hate banshee owners [img]images/graemlins/chairfall.gif[/img]

Audiman · #92 07-10-2003, 01:55 PM

Did you talk to power pro's about pipes? They make a chrome mx pipe with hush silencers for $460.00. Call them and ask about arrestors, I would make some just to run these pipes. Call them and tell them what you want, they can make a pipe if they have to. www.thepowerpros.com

96warrior · #93 07-11-2003, 06:51 AM

Thanks, are you running them? And are they made out of stainless?

Tried the leaner jetts, still cutting out at high rpm. I have to get this figured out first. Trying to think of what the problem could be. According to the plugg check it's still rich. [img]images/graemlins/thud.gif[/img]

Audiman · #94 08-01-2003, 01:57 AM

????????????????

Audiman · #95 08-02-2003, 01:55 PM

?????????????

#96 04-13-2005, 02:41 AM

banshees rule and all u 4 strokers hate it, its o.k. dont be mad at us be mad at yamaha for making the best quad ever. u guys have 2 stokes to many, c u at the top of the hill.. lol !!!