|Nissan, All Disscusion of Nissan, Off-Road Vehicles|
| ||LinkBack||Thread Tools||Display Modes|
Some 300ZX turbo specs
single key crankshaft
7.8:1 compression ratio
6.7Psi of boost
Garrett T3 turbo
top feed fuel rails/injectors
side feed fuel rails/injectors
Garrett T25 turbo
5 psi of boost
8.3:1 compression ratio
floating wrist pins
forged doublekey crankshaft
16 bit ECU
these engines can take 450hp in stock form as long as there is no detonation present. the only weak part on these was the fuel system wich can only support 300HP, or 14psi. some guys have gone to 15psi on a T3 car without intercooler and TTZ fuel pump and fuel pressure riser.
this is just some info for those considering either engine. 8/87 was the first of the '88 model year. 88-89 engines had a longer crank and pully.
a 84-89 turbo manifold wich bolts up to all VG engines costs about $135!
Re: Some 300ZX turbo specs
ummmmmmmmmmm..........say that in English please..hehehe
If you love something, set it free.
If it comes back, it was meant to be.
If it doesn't, HUNT IT DOWN AND KILL IT!!!
All times are GMT -5. The time now is 08:41 PM.