For Sale/want post

[BurnedBronco]

again, a new one.
post what you have for sale or you want
use PM's for negotating, this is just posts for sale or want
No pics, link the pics so that way everyone doesnt have to view them if they dont want to.
list your asking price, and your zip code



my JUNK
Crap lock for 8.8 $20
trac lock for d44 3.92 and numerically lower ratio $20
Serpentine belt for 1992 351w w/AC. 2,000 miles $10 awsome spare or just to put on
milemarker hydro electric valve with $70 ford ends. $135 obo.
milemarker hydro winch remote. $25
78 radius arms $40
EB radius arms without the end caps $30
http://www.superford.org/getfile.php...radiusarms.jpg
8" 2" drop reciever $30

CHEVY D60 front, dually, missing one caliper and rotor $750
http://www.superford.org/getfile.php...e=DSC01569.jpg

Ford 203 T case missing low range box. chain appears busted $25
one 1978 d44 housing. CLEAN and PAINTED. $125
10.25 sterling, 1988, no shafts, and one kinda messed up spindle. no drums $100
set of ford HP d44 shafts. $100
ford HP short side inner, and outer $50
d60 front wheel hubs, SRW $100
TTB outers from a 92. $50 for the pair
TTB inners from a 92 $50 for all 3
TTB 3rd, empty, $25
WARN NEW IN BOX longside inner for HP 1/2 ton d44. $150
1992 E4OD 132K, shifts good, and converter, make offer.
60430 is the zip

[studlybil03]

Hey gang, I'm sad to announce the selling of my toy rig/daily driver.

1990 F250 super cab XLT Lariat:
Power windows
Power Door Locks
A/C (needs recharging)
towing package
bedliner
Dual exhaust
Sliding rear window
351 Windsor v8
Brand new ( I mean a few days old) rebuilt E40D with 1yr warranty, brand new Torque Converter was installed
Had tune up not even 4k ago.

What it needs:
A stereo head unit (has pioneer 3 way speakers in the doors)
A passenger side doorlock actuator
Some body work and paint wouldnt hurt

I'm only asking 2500.
onedieselzuki@yahoo.com

[wbcarver]

Parting out a built '79 FS Bronco.

Have these items for sale.
All come out of a running vehicle - motor blew.

All prices are negotiable unless marked.
Trades for ? considered.
But my favorite trade is for fine art.
Preferably portrates of dead presidents.

High pinion Dana 44
4.56 gears
ARB
Alloy Shafts

Complete end to end including brakes, hubs, steering etc.

Ford 9"
4.56 gears
Detroit Locker
Alloy Shafts

Complete drum to drum.

Would like to sell the axles as a set.
Asking $1800 for both axles complete.

Might split for the right offer.

ARB compressor.
$125.


NP 435 trans & 205 T/C
$500

Complete FS Ford 4" lift
Unknown brand.
Front Springs
C-Bushings
Rear lift Springs (No blocks)
Misc bushings etc.
$300

Full roll cage
fits FS Bronco
Homemade, but not a bad job.

$100 you remove


78 - 79 FS Bronco hard top
with homemade safari-type rack
Fair to Good condition

$200

Have lots of other Bronco parts not listed too.
Just ask.

All parts are in Westfield, NC
(Near Winston-Salem)
I am not interested in shipping large parts, but delivery is possible if you are within a couple hours drive.


Did I mention that all prices are negotiable ?!?!?!

Bill C
336-351-6784
wbcarver(at)webbtrixx.com

[freebird01]

1983 F250 4x4 Ext cab and 1986 F250 4x4 Reg cab.
both automatic.

83 has non running 351W and good body and frame. 96k
also has cruise (working), A/C (non working), and tilt steering
Can be started to load but doesnt run right
is LD250 w/ semi float D60 in the back
has factory tach i added to cluster (not original to truck)

86 has good drivetrain and good running 460 but body junk. (carb not included but will leave on to hear run and to load) 125k
also has Cruise (non working), tilt steering no a/c
is a HD250 with FF sterling 10.25 rear
sliding rear window
factory tach (orig to truck)

both trucks have a D50 front axle and both trucks are 3.54 ratio non limited slip
both have good PA titles in my name


$1200 for the pair. will seperate $750 each. prices are negotiable.


both trucks are located in Montgomery,Pa 17752
both trucks will need trailered. cannot be driven

[GTRider245]

A few things...
Still have the ProComp Superduty shocks.
ProComp shocks, 80-96 F-150/Bronco
Factory wheels
Cherokee gas tank skid plate

[figgy78]

I'm looking for a "cheap" 9inch suspension lift for my 79 f150 if ya got one "cheap" please pm me!

also need a tailgate for the same truck would prefer to be kinda local for I really don't wanna spend my childrens school funds on shipping costs [img]images/graemlins/violin.gif[/img] [img]images/graemlins/40BEER.gif[/img]
thanks in advance!

[BRONCOMANIA]

Someone i work with just bought a 87 bronco and is missing a lower side bracket and bolt for the spare tire carrier, asked me to check and see if i can find him one. If anyones got the part laying around, let me know how much, the seller removed the carrier cuz he cracked the tailgate with a oversize spare, but lost that piece.

Long time no see fellas! I'm still alive! Hope I'm posting this want ad correctly!

I am looking for a 2 or 4 barrel intake for a 300 six cylinder. I would prefer a 2 barrel that would fit a stock Motorcraft carb from a V-8, but would settle for a 4 barrel if no 2 barrels are out there.

I will pay cash without empty promises. I will pay shipping. Email me at hakefisherman@cs.com if you have one you would part with or if you have a link where to find one. Thanx!

[Blown]

Powerdyne Bronco/ F150 Supercharger

Head unit, 6lb and 9lb pulley, mounting bracket, belt, belt tensioner, crank drive pulley and spacer, fan spacer, various plumbing, clamps and bolts. What you see in the picture is what you get. I had this on my 1990 Bronco with 302, mass air/MAF and it was plumbed to an Edelbrock Mustang intake. It can be seen here: http://fordfuelinjection.com/bronco/engine/blown.html

I've had my fun with it, want better mileage, and with 5.38 gearing my build still moves the bronc great! Reserve is $850.

Package is13X13X17 and weighs 40lbs. Shipping should be about $28

Bid here: http://cgi.ebay.com/ebaymotors/ws/e...B%3ALC%3AMT%3A1

hey all looking for a complete back door i think it is with motrived window cause my 79 bronco the back window motor burned out and i got a huge dent and paint chipping on it it is the modle with the handdle inside thanks email mvlv1412@yahoo.com im in jesery