For Sale/want post

needed for my 1982/3 Ford 4x4
------------------------------------
this is my truck - http://www.superford.org/registry/ve...il.php?id=5110

passanger door. complete door in good shape. mine has some bondo and the bottom is rusting pretty bad. i dont need the guts (window track, guide, window register (window roll up/down grearbox thingie) but ill take a complete door for the right price. i dont need the inside panel. the best door for me would already be ford tan

i do need the guts for the drivers door thow (window track, etc., etc.,). but my drivers door metal is in very good shape.

drivers front fender. perfer it in ford tan.

id take two complete doors and a fender if the price was right. my truck is tan, so naturally id want tan parts, but any color will work [img]images/graemlins/smile.gif[/img]

im also looking for explorer rear disk brakes, propotion<sp> valve and booster. i have an 8.8" drum rear end and i like to convert to real ford disk without going the caddy/chevy way or the super expensive wilwood setup.

factory ford duel shock front towers. way down the list of upgrades, but it dont hurt to ask [img]images/graemlins/laugh.gif[/img]

Email me with your deals -
cadster_3d@yahoo.com

[Jacob_Royer]

You guys will love this one....


For sale Mildly Built Chevy (sigh long story) 305. .40 over Flat Top Pistons, high volume oil pump, 882 heads, Cam is aftermarket brand or grind unknown but feels about like a edelbrock performer. Alumminum 4bbl intake, flowtech headers, purple hornie collector glasspacks, crome valve covers. Also 3spd tranny, clutch(burnt out good core), Flywheel bellhousing etc, new hurst floor shifter. All belts hoses and brackets. Also motor mounts and alternator, 3-row radiator.

$325 All Or Trade for a good FORD engine as I can use one and don't need this for anything.

A little about the engine, Its in a 73 chevy 1/2 tone 2wd which currently has a large walnut tree laying across the bed. The truck can go with the engine if you want it. Good doghouse, glass, doors etc. The engine came out of my buddys 78 camaro, he works at a machine shop and built it about 3 years ago. A few months after he got it in the car he mixed budwieser with a heavy foot and hit a tree. He had the truck sitting with a 6cyl in it and stuck the v8 in. I bought it about 2 years ago for the engine (I was going to put it in a s-10) Drove it till I burnt the clutch out and let me tell you it is VERY strong I was downright impressed. I used to have a chevy truck with 400 sb. and this thing would blow it off the road. Engine is a little dirty but didn't seem to use any oil. Everything is there except the carb which ended up on another project of one of my friends after I screwed the clutch up. I have absolutely no use for this thing whatsoever since I have all ford stuff. I would happily trade for a 302 or a 300 really any ford engine that will go in my 76 f-250. [img]images/graemlins/givemebeer.gif[/img]

[esm]

Hi,

I have a Ring &amp; Pinion set with shims and bearings out of a 96 302, 8.8" differential (5ok miles). Is there any interest out there? Austin, TX location.

Ed

em@icom-design.com

[Steve83]

mkraffert [img]images/graemlins/deal.gif[/img]

I have several. Look in the Spare Parts photo album in my signature link. You can e-mail me from here or from SuperMotors.

[img]images/graemlins/grin.gif[/img]

[havack]

I have a 1985 Crown Vic for sale as a whole or in part. It is complete except for Engine and Tranny, with clean title . Manual windows and locks but it has power seats. Blue with gray interior. No broken glass except one rear tail light. No body damage, only some scratches.

Little old lady driven, only too and from the grocery store, never hot rodded, all highway miles........

Location is Memphis. Price is $100 for it all. In part is TBD.

[studlybil03]

Buncha stuff, mostly new:

Front 1978 D44 straight axle, axle needs assembly, I'll sell a brand new front true-trac locker, 5.13 R&amp;P kit (with install kit), new ball joints, outter bearing kits, Brand new warn hubs, most of everythings there just needs assembly..I'll take a loss at 400 obo

Rear pickup Ford 9", rear carrier has Lincoln locker, comes with 5.13 R&amp;P kit (with install kit), brand new axle bearings, and good housing, needs all brake components, its the 31 spline big bearing axle, also needs to be put together. my loss at 300

Contact me at: onedieselzuki@yahoo.com

Items located in jacksonville Florida, not willing to ship but will consider meeting.

i need an alternator for a 1986 bronco with the i6 300, 4.9l engine, one that works. pm me if you have one you want to get rid of. i also need a class 3 receiver for a 1988 bronco with the 351 v8. let me know.

[payton]

even tho its a jeep thougth some one over here might be interested.
would sell hole for 4500 or possible part it out . id like most items to be accounted for being sold b4 i reall part it out.. so anything u guys may want plz feel free to email me at payton@pirate4x4.com

jeep parts for sale:

89 frame grill hoood.windshield frame. cut body- 475
87 5.0 ho all wiring. 500
2- c6 small block trannys 300each
np 205 150

dana 60s 4:10s complete with u bolts 1500set
39.5/16.5 tsls with rims 8 bolt 500set
4-rs44044 brand new never ran 400set
33s-16.5s roller tires 100set
custom fuel cell 300
warn 8000 400
steering box 50
3 inch drop pitman arm 30
steering shaft 50
steering colunm with key 50
radiators
mustang rad 75
cj7 v8 rad 75
rear flip and fold seat 50
drive shafts from f350
one with cv joint 75
one long with slip 50
bus style heater for added in cab heat 70

clean title with vin plate 500


always willing to trade.. looking for motorcycle/ 4 wheeler.. or anything interesting. as always obo..

[MY2ND78]

I have a pair of factory sliders for the cap on 80-96 Broncos up on eBay if anyone is interested:

http://cgi.ebay.com/ebaymotors/ws/eB...spagename=WDVW

[MY2ND78]

I have 4) 33"x12.5"x15" Yokohama Geolander AT's on 15"x10" wagon wheels 5 on 5 1/2 lug pattern. Tires have 60-75% tread left and are in nice shape with even wear. $200 + shipping. Located in NJ.