For Sale/want post

[Capn_Crunch]

I have a late model Bronco softtop with hardware. It's used and in good shape. $400.00 plus shipping.

Email me at mightydoor@msn.com

[2facedbronco]

I need an upper intake for my 5.8 EFI in my 92 bronco. Can anyone help?? My zip is 29609 for shipping. ANYBODY I'm in BAD NEED!!!!

Rob
hiposped@yahoo.com

Well I pretty well hosed up the one I had trying to make something work after the cable broke.

84 Bronco 351 w/4bbl Holley. Nothing I've been able to lay my hands on is the right length and I've now wrecked the sheath etc trying to mix and match stuff.

I did get something to work but only getting 1/2 throttle is a pain, even if it does save gas [img]/ubbthreads/images/graemlins/wink.gif[/img] .

Please PM me if you have something close to correct.

PS, on edit: I have a set of old chrome/steel 5 spoke 5-lug 15x7s for free if anybody is near enough to want them. They have bald 31s that hold air most of the time. I was holding them for snows but I'm simplifying. They are a little crusty but they are true. PM for pic.

Thanks,
- Jeff

[FoundOnResDead]

I have a 460 engine, c6 trans and 208 transfer case for sale. The engine is out of a truck originally but was used in a jet boat. Ran great when pulled. The tranny and transfer case were out of a 1981 F150 and the guy said it was running and driving when he parked the truck. $400.00 takes the whole works.
I have a set of chrome 15"x10" rims for a bronco or truck. They are in great shape. $150.00 takes them.
I have a rebuilt fuel injected 302 out of a 1993 Bronco. Ran awesome when pulled. Very low miles. $350.00 takes it.
I also have a 4.9L straight six out of a 1990 F-250. Run great when pulled. Needs a new distibutor module. I robbed it for another truck. $300.00 takes it.
I have a bunch of 1356 transfer cases that need to go. Some are manual shift some are electric shift. Call me with your needs.
I have a new rebuilt ZF S5-42 manual transmission. I bought it new for $850.00 plus shipping and core charge. I will throw in all the spare parts I bought for my other transmission(input shaft and bearing kit about $600-$700 in spare parts) and a new slave cylinder($80.00) and only ask $650.00 for it. It is for the 4.9L, 5.0L and 5.8L engines. This is quite a deal. I got rid of the truck I was going to put it in.
I also have many interior parts for ford trucks and broncos. Give me a call on what you need.
I need to get rid of this stuff so I can make room for my race car.
Can be reached at 715-528-5017(home), 906-282-0587(mobile) or from 3pm to 11:30pm at 906-779-2444. Ask for Wes. I live in Florence, WI. 54121 E-Mail is spankey1@charter.net

[papertiger_98]

truck was totalled and need to get something from it
Have all parts off a 1980 Ford Bronco Xlt (full size) almost new engine has only 70,000 miles on truck good body needs paint to make great minor rust. 4” lift kit still good if wanted for an f-150 or bronco. 9” rear end. 4.10 R&P, 35 x 12.50 R15 tires 2 good ones, 15 x 11.50 aluminum rims, berg-warner T-18 4-spd tranny (rated 2nd most indestructible off-road tranny), new process 302 transfer case, performance exhaust ,4x4 all in great condition. Only thing broke is frame bent and complete front axel destroyed. Many mods to engine including:
Top half except heads all rebuilt as edlebrock
4bbl edlebrock carb
Heddmann close block headers
Looking to part out call if interested or wish to buy truck
Contact me by email

[jeeperjohn]

looking for a Dana 44 carrier for 4.56 gears.

[papertiger_98]

or can use a front axel solid or not to fix part of my problem. or as close to a solid axel i can rebuild to do what i want to

[havack]

Ok, Don't know who read this anymore but for those that do:

I have a good 8000lb Warn winch located in Memphis for $450 plus shipping (about $55) Email me at email in profile if interested. I may not check this for a while.

[freebird01]

i got a complete hub to hub D44 from a 79 bronco. either $150 come pick up in myerstown,PA or trade for a 5 on 5.5 D44 from a scout

3.50 gears open carrier

pm me if interested

I need a good 4x4 C-6 for a big block. I would prefer a E4OD speed if someone could tell me how to hook the thing up(electronics). I will be removing a great running 302 and tranny from my 96 Bronco if anyone is interested in those. The engine has over 160,000 miles, but doesn't smoke a bit. Thanks for the help and excuse my stupidity as I am a new Bronco owner and this is my first 4x4.

Thanks,
Shay