Torque specs for 360

[YJ_88]

I was wondering if anybody has the torque specs for a pre-magnum 360. I have to change a head gasket on my bosses work truck but of coarse he doesn't have a manual. ITs for an 82 360 and i will need head, intake, and exhaust manifold torque specs. Thanks

[superswamper]

I'm not sure but the 94+ is 25 exhaust manifold, intake bolts first step is at 12 in lbs increments to 72 ft lbs in a specific sequence then finally to a total of 144 ft lbs and the head is 50 ft first then final is 105 ft lbs. This is out of the haynes manual for 94+ magnum rams, not sure if its the same for pre magnum but should be close.
Do what I do, look at a repair book at the local repair shop to see if these are correct or charge the boss man :-) for the book...