|Diesel Tech Diesel-powered discussions, all makes and models of 4x4's.|
| ||LinkBack||Thread Tools||Display Modes|
raptor fuel system installed on 02 cummins with in tank pump.
The in tank was a manufacture retrofit on these trucks
Kit comes with pump, lines, frame mounting bracket and sending unit kit to install new suction line.
Modding the sending unit took me longer then installing the rest of the kit.
New suction kinda cool machined part
Stock pump gutted from the unit and new suction installed. ready to go back in the tank.
Decided to pull the bed.
Bracket installs easy. But I don't like that it hangs down
Pump is adjustable for pressure and is running in the 17-19 range as advertised. The stock pump was 4psi at idle. This pump upgrade is an attempt to save the VP 44 injection pump
In this photo my daughters holding the rrrrs at 2k
Truck has deeper tone now
89 ifs-sfa truck tranplanted in a 83 K-5 blazer offroad only rig
Last edited by The_Kid; 03-01-2014 at 10:40 PM.
Very cool set up. Looking at doing a similar set up on my 88 F350 cummins swap.
All times are GMT -5. The time now is 03:47 AM.